McLaren Artura Is a Thoroughly New Hybrid Supercar
Since the launch of P1, this is the first time that McLaren has made a comeback to the world of hybrid vehicles with the model Artura. Although it shares a lot of similarities with McLaren’s Sports Series, it still looks like a new supercar for a number of reasons. It comes with a fresh twin-turbo V6 engine and a powerful electric motor. Let’s find out more about this amazing supercar. Read on to find out more.
As announced earlier, the Artura features a fresh carbon-fiber tub and a number of other new chassis parts. Apart from this, the rear suspension has also received a lot of changes. But what makes the hybrid car different is the hybrid twin-turbo 3-liter V6.
The special thing about the engine is that it’s an angle of 12 degrees with a turbo in the shape of V. There is a dry-sump oil mechanism as well as a redline of 8,500 RPM. Also, it weighs 110 pounds less than the regular V8s of McLaren.
As far as the power generation is concerned, the car generates a torque of 431 pound-feet and horsepower of 577. Besides, the engine is paired with a powerful electric motor that can produce up to 94 horsepower. The combined power of the engine and the electric power is 531-pound-feet torque and 671 horsepower. Also, the motor can make up for the lack of torque when the RPM is low. This allows a much better throttle response.
The battery is powerful enough as it provides up to 7.4kWh. Even if you use the motor to drive your car, you can go up to 19 miles before you need to recharge the unit. The motor and engine come with an 8-speed double-clutch automatic transmission. And the good thing is that it has no reverse gear, which makes the transmission lighter and smaller. And power is transmitted to the back wheels.
Despite the fact that the Artura comes with a heavy better and an electric motor, the vehicle only weighs around 3,305 pounds. The engine is powerful and lightweight, which is why you can hit 60mph in just 3 seconds. The top speed of the vehicle is 205 mph.
We can’t just rely on performance and the engineers behind McLaren knew the fact. The interior of the car speaks volumes about why you should go for it. The car has an organic design, especially for the screen you can see. Both the steering column and the screen are connected. Therefore, the screen moves when you move the steering wheel.
On the right side, you have a 9-inch crystal clear infotainment screen that features a crown-shaped control dial. Also, the interior features a lot of modern amenities like high-beam headlights, lane-departure warning, adaptive cruise control, Android Auto, and Apple CarPlay.
The Artura will be available for purchase during this year’s third quarter. The base price is set at $225,000. You will be able to choose from four trims: Vision, TechLux and Performance, and the base model.
In short, this was an introduction to McLaren Artura, which is one of the best hybrid supercars.
At Apex Auto Garage, you can hire the best McLaren service Dubai. So, if you are looking for a good service, you can contact them for Mclaren repair Dubai.
Which Ferraris Are Convertible? 6 Models
Ferrari is on the list of the most popular supercars in the world. They are known for their prestigious heritage, unique design, and incredible performance. The models are those that can be converted. Some of the convertible ones include Portofino, California, the Spider, and so on. In this article, we are going to talk about 6 models of Ferraris that are convertible. Read on.
1. Ferrari Portofino
Ferrari Portofino is on the list of existing product lines of the supercar that includes several other convertibles like F8 Spider and 82 GTS. This car is not a good choice for racing but can be used as a high-performance vehicle for a drag-strip race every now and then.
Portofino is a successor to the California T model that was quite popular for its affordability and practicality. With a front-engine design, this supercar is powered by a V8 engine.
But it features a stiffer suspension for better ride quality and higher power to maintain a high speed of 199 mph.
2. Ferrari 488 Spider
With a 3.9L V8 twin-turbocharged engine, this supercar only needs 3 seconds to touch a high speed of 62 mph. The top speed of this giant is 202 mph and it’s on the list of the best cars as far as performance is concerned.
The 488 Spider is an ideal convertible vehicle. The hardtop gives you protection from the elements. Plus, it can be folded so you can get some sunshine and fresh air. It’s easy to switch between the convertible and the coupe model. The hardtop takes only 13 seconds to retract.
3. Ferrari 812 GTS
Ferrari 812 GTS made its debut two years back in 2019. It collected a lot of praise from experts and critics in the industry. This open-top variant can generate 530 lbs-ft of torque and more than 700 hp for the highest speed of 211 mph. it can go from 0 mph to 62 mph in just 3 seconds. So, it’s one of the best convertible models of Ferrari.
The hardtop of the vehicle takes only 14 seconds to retract. And the good thing is that the roof can be retracted only when the speed is below 24 mph. Plus, the retractable top has no impact on the design or performance of the car.
4. Ferrari F60 America
Ferrari is quite popular for launching appealing automobiles. The F60 America is on the list of rare and expensive cars. This limited edition is convertible and is based upon the popular F12 Berlinetta. However, this supercar is a lot more expensive than the Berlinetta.
5. Ferrari LaFerrari Aperta
The Ferrari Aperta is known for its high speed. This convertible supercar is powered by a 6.3 Liter V12 engine and generates a torque of 664 lbs-ft. Plus, it generates 949 hp of power to reach a top speed of 217 mph.
6. Ferrari California / California T
This one is the most popular convertible Ferrari model. It’s an entry-level Ferrari for the average buyer. Although it’s affordable, it can’t be behind any other model when it comes to performance. It can hit a top speed of 192 mph and goes from 0 mph to 62 mph in 3 seconds.
In short, this was an introduction to 6 convertible models of Ferrari. Hope you will find this article helpful.
Apex Auto Garage is your ideal choice when it comes to Ferrari service Dubai. You can try out their services for Ferrari Repair Dubai.
How Many Ferraris Are Built Yearly? 6 Wild Facts
Ferrari is one of the most popular supercars. The company makes about 9,000 cars on an annual basis. However, they made only 1,500 cars during the 10-year period between 1987 and 1997. In this article, we are going to talk about 6 wild facts about the number of Ferraris that are built annually.
Each year, more than 50 million cars are manufactured across the globe. Of all these cars, the number of Ferraris is 8000 units. In other words, it’s only 0.016% of the total figure.
In 2016, the company made 8014 supercars with an announcement that it will increase production to around 9000 units.
Why does Ferrari make a limited number of cars?
Around 8 years back, Ferrari thought that manufacturing too many vehicles was against the company’s interests. So, they put the limit on the protection of the brand and make it exclusive.
Luca di Cordero Montezemolo, the ex-chairman said that launching too many vehicles into the market was a big risk. Sergio Marchionne, the current chairman, has plans to increase the production to 10,000 units a year.
It all boils down to exclusivity.
What is a collector’s edition?
The term collector’s items refer to beautiful items that are rare. And Ferraris meet this requirement. Plus, Ferraris are exclusive supercars, not your regular vehicles. This is the reason Ferrari loves will pay any price to get their desired rare models of the car.
Do you have to meet any conditions to buy a Ferrari?
Yes, you have to meet a few conditions before you could qualify for this purchase. Listed below are some of those conditions:
Ownership history: if you have never had a Ferrari before, your chances of being approved are very slim. But you will be more likely to be approved if you have had a second-hand one before.
Age: if you are below 40 years old, you won’t be considered a serious buyer.
Relationship with the dealer: you must have a strong relationship with a reputable Ferrari dealer.
What is the total number of Ferraris in the world?
By the end of 2018, around 208,931 Ferraris were built. We don’t know for sure whether all of these supercars are still on the road. Since these cars are super fast, they are more prone to accidents.
How much time does a Ferrari take to be built?
Without any doubt, these cars are not made on a mass scale. Roughly, it takes 21 days or three weeks to make a Ferrari. After all, if you are going to pay $2 million for a supercar, you have to make sure it’s perfect from all angles.
How long do you have to wait to receive your Ferrari?
It depends on the model you are going to buy. If you are thinking of personalizing your vehicle, you should wait for at least 5 years for the delivery. Also, if you want to purchase a one-off edition, you will need to sit with the designer and tell him your requirements.
Some buyers may even have to for 2 years before they could see their desired car. But the wait is totally worth it.
So, these are 6 wild facts about Ferraris. Hopefully, you will find this article interesting.
Apex Auto Garage is one of the best service providers when it comes to Ferrari service Dubai. You can check out their services for Ferrari Repair Dubai.
What Are Ferraris Made Of? Here Are The Facts
Ferrari is one of the most popular luxury cars built in Italy. These vehicles are state-of-the-art machines as they feature superior engineering, outstanding craftsmanship, and incredible attention to detail. You may be wondering what makes these supercars so amazing. In this article, we are going to get a deeper insight into what these vehicles are made of. Read on to find out more.
What are Ferraris made of?
Basically, Ferraris are made of different types of materials to deliver high-performance. Some of the most common materials include premium leather, carbon fiber, and aluminum, to name a few.
The Frame and Engine
The frame and engine of the supercar are made with aluminum. Unlike other manufacturers, the company still prefers aluminum for making these vehicles. For instance, Lamborghini and McLaren use carbon fiber as the primary building material because of its strength and lightweight.
According to the manufacturer, aluminum is one of the best multi-metal technologies that allow a variety of applications. The shell of Ferraris is made of aluminum while the engine is made of aluminum alloy.
Carbon Fiber Parts
Listed below are the parts of Ferrari that are made using carbon fiber.
- Exterior trim elements
- Carbon fiber aerobridge
- Carbon fiber side skirts
- LaFerrari Style Carbon Fiber Bridge
Other Materials
Apart from carbon fiber and aluminum, steel is also used in the making of these supercars. The reason is that steel is easy to use, reliable and inexpensive. This is the reason it’s the most preferred material for a lot of auto manufacturers. Besides, the manufacturer uses premium leather as well.
In some models of Ferrari, leather is used in paneling, gear stick, steering wheel, and seats. Some parts of the cabin, center console, dashboard, and bonnet are also made from high-grade plastic and wood.
Ferrari features industry-beating electronics, such as complex navigational systems, safety gadgets, driver-assistance features, and anti-theft mechanisms. These luxurious supercars represent world-class engineering.
Although we don’t know about all the materials the vehicle is made from, some common materials include leather, plastic, wood, steel, carbon fiber, and aluminum.
The Body
For bodywork, Ferraris use high-grade aluminum. The frames are built at the Scaglietti plant. In these workplaces, skilled technicians and robots perform the welding, gluing, and joining of the parts.
The Cabin
The cabin of Ferrari uses a special type of leather known as Ferrari Nappa. And this leather is made using the hides from cattle found in cold climates.
Although Ferraris are lightweight, they are totally reliable. In fact, the lightweight materials help the vehicle deliver great performance. Despite the lightweight metal, these supercars are as reliable as vehicles made of steel. But the use of aluminum makes Ferraris more expensive when it comes to regular maintenances.
The Engine
Yes, the engine of Ferrari is extruded from aluminum. Molten metal is poured into molds for solidification. Each component is joined and finished manually. For certification purposes, the engine is stress-tested and x-rayed prior to mounting.
So, this was a description of some common types of materials that Ferraris are made of. Hope this helps.
If you are looking for a good Ferrari service Dubai, you can’t find a better service than Apex Auto Garage. You can contact them for Ferrari repair Dubai services.
Ferrari Service: The Most Common Ferrari Issues
Ferrari is like a prancing horse. It features a roaring engine and an Italian design. You won’t find many cars that can compete with Ferrari when it comes to prestige and excitement. Although it’s a custom-made supercar, it has its own set of issues and quirks. Therefore, it’s important that you get your car serviced in a timely fashion. In this article, we are going to talk about some of the most common Ferrari issues.
Most common issues with Ferraris
Unlike other vehicles, Ferrari’s enjoy a higher demand as they get older. But they do go through some wear and tear with the passage of time. As a result, some components may even fail, which can lead to poor performance, oil leaks, or fire.
Given below is the description of some common types of issues with Ferrari. Regular service and maintenance can help resolve these issues.
1. Cracked Fuel Line
Reinforced rubber is used to make the fuel lines of Ferrari. This helps make sure that the lines don’t kink or split. As these rubber lines get older, they tend to crack and dry. As a result, the cracked lines spray fuel on the engine and exhaust. Since the engine is hot, it may ignite the fuel instantly.
Therefore, it’s important that you get the aged fuel line replaced as soon as you can. An expert technician can help you do just that.
2. Worn Gaskets and Seals
Seals and gaskets, like fuel lines, tend to wear with the passage of time. This can lead to oil leaks in the end. If you want to prevent oil leaks, you may want to get the oil pump seals and head gaskets replaced.
If the exhaust gasket of our Ferrari is failed, it may result in an exhaust leak that may reduce the performance of your car. For gearbox or exhaust work, the gearbox and engine have to be taken out of the body of the car.
3. Carbon build-up
Although timely oil change can help prevent carbon accumulation, it may not be preventable in some cases. You can get your Ferrari engine sealed in more ways than one. For instance, you can use special lasers to clean disassembled parts.
You can also scrap parts using special brushes. But the best way is to opt for a special vacuum cleaner and air compressor. The role of the air compressor is to push walnut shells into the valves. On the other hand, the vacuum filters out loose shells and carbons.
Here the idea is to make sure that the port valves are closed. This helps ensure that these substances don’t get into the combustion chamber.
4. Electrical issues
Just because the check engine light of your Ferrari is turned on doesn’t mean there is something wrong with the engine of your Ferrari. If the weather outside is very cold, any exposed wire of your vehicle will corrode much faster. This may result in electrical issues, such as poor ignition and dim headlights.
Therefore, we suggest that you get the battery inspected for parasitic drains. In this case, you may have a short circuit or a component failure. So, what you need to do is get the failure parts replaced with OEM parts.
In short, these are some of the most common issues with Ferraris. If you have any of these issues with your vehicle, we suggest that you contact a technician and get them fixed as soon as possible.
For Ferrari service Dubai, you can check out Apex Auto Garage. They offer the best Ferrari repair Dubai services.